Pressure Vacuum Pump Kangaroo KG250AEH

Pressure Vacuum Pump Kangaroo KG250AEH is a line of intelligent integrated pressure pump manufactured by Kangaroo. It is equipped with modern technology, suitable for the normal pressure use purpose for the households.

Characteristics of Pressure Vacuum Pump Kangaroo KG250AEH

• Pressure Vacuum Pump Kangaroo KG250AEH is quiet operation, sound insulation, 250W operation power, power saving and high efficiency. The pump is equipped with capacitor and overheat protection device in the event of problem or overload, absolute safety when using.
• Pump housing is integrated with anti-dehydration sensor, intelligent operation
• Pump relay is specially designed and not cause noise and quiet operation.
• Pump case is made of cast iron with angular, strong and durable lines.
• Engine case is made of aluminum alloy, providing the best heat dissipation.
• Pump wings are cast in bronze similar to other types of vacuum pumps in the market.
• Pump shaft is made of stainless steel, resistant to heat and corrosion.
• Motor is winded by special copper wire and integrated overheat protection relay, class B insulation standard, water and dust proof IP 44.
• Power 250W, using 1 phase 220V/50Hz.
• Maximum pressure head of 24m, maximum suction of 8m.
• Maximum flow of 2.0 m3/h.
• The machine can pump hot water up to 50°C with the environment temperature condition below 40°C.

Advantages:

Pressure Vacuum Pump Kangaroo KG250AEH uses electronic pressure switch with Chip PC, avoids to turn off  the pressure switch regularly to prolong the life of the product.

Application

The machine is used as a pressure relief device in the main pipeline when it is weak, capable of transporting water from low to high (note the maximum suction and pushing pressure head of the machine).

Pressure pump should be located outdoor with a roof below the tank for pump protection.